Zhida Hardware Co.,Ltd

Catalogue

Contact US

Address: Chongkou Dashi, Panyu, Guangzhou, China 511430

TEL: +86-20-33956380

FAX : +86-20-33956380

Email: 

Sell: sell@zhida-hardware.com

Export: export@zhida-hardware.com

Website: www.screw-bits.com

Home > Industry News > Content
Riveting Introduction To Basic Knowledge And Use
- Sep 04, 2017 -

Hollow rivet is typically used for clothing, footwear industry, again riveted with solid, heavy workpiece connection, often inseparable structure, empty heart widely used rivets, Shu Kou (smaller diameter tail) to hard wire manufacturing, Can not needed pre hole penetrating 0.5mm thickness within of plate, rivet cannot bent deformation, widely application in password box, travel box and forces bags above, hollow nail (half hollow rivet) is using cords manufacturing, General requirements riveting open Hou cannot cracking, has many species type, currently on some toy above of axis has began big area using half hollow nail or child mother nail alternative, can sharply reduced production cost. Core and drive rivets are used for relatively thin flexible materials riveted, not strict, good material usually made of plastic materials for manufacturing production.

Round head rivets are mainly used for riveting occasions with large lateral loads, the most widely used. Flat taper head rivet as head of mast, resistant to corrosion, commonly used in corrosion strongly riveted hull, boilers, water tanks and other occasions. Countersunk head, 1200, blind rivets are mainly used for surface shall be smooth, with loads less riveting. Countersunk head, 1200 countersunk head rivets are mainly used for surface shall be smooth, with loads less riveting. Flat head, flat head rivets are mainly used for sheet metal or non-metallic materials such as leather, canvas, wood riveted. Flat countersunk head rivets are mainly used for riveting of non-metallic materials. Semi-tubular rivets are mainly used as the load is not riveting. No head rivets are mainly used for non-metal riveting applications. Light weight hollow rivets, nails weak, used to load small non-metal riveting applications. Tubular rivet for riveting of non-metal material does not vary with the load.